The simple characteristic of wall mount exhaust fans are simple: nasty air out, the sparkling air in. This feature is well understood through many householders have a tendency to overlook the other indispensable motive of wall mount exhaust fan, which is putting off moisture in the air.

Moisture problems resulting from excessive humidity is one of the biggest contributors to structural rot. Every time you run the water, you create steam to a sure extent. Contrary to famous beliefs, steam is no longer only produced with the aid of hot water. So long as the water is fantastically warmer than the modern-day room temperature, steam will be created from that distinction in temperature. This creates the best breeding environment for mildew and mildew, main to nasty odor and finally eating into the drywall and timber frames.

Exhaust followers furnish a way to expel the humid air earlier than it has the hazard to condense, alongside with doing away with an unpleasant odor that may additionally linger. Wall mounted extractor fans are required by way of constructing codes, particularly if there’s no operable window.

WHAT SIZE AND CAPACITY OF WALL VENTILATION FAN DO I NEED?

Now that we be aware of the significance of this little workhorse, how ought to we decide which wall ventilation fan to buy?

A wall ventilation fan’s capacity to pass air is rated in meters cubed (m3) per hour, or m3/h. That is, the higher the m3/h, the extra air the exhaust fan will pass from your room. This means:

The large your loo or laundry, the higher the m3/h rating needed, and vice versa.

If an exhaust fan is to be set up close to a bath or bathtub, seem for one with IPX4 Rating. IPX4 ranking is popular for exhaust followers that are suitable for installation above bathe or bathtub.

The wall ventilation fan you need is determined with the aid of the kind and size of the room it is to be set up in, as distinctive rooms require one of a kind charges of air flow.

SOME FINAL IMPORTANT CONSIDERATIONS ABOUT WALL EXHAUST FAN:

Wall exhaust fan with light is very handy – Consider putting in an exhaust fan with mild to substitute an existing mild fixture for easier wiring and convenience. It is less expensive to do so too.

Noise degree – pay attention to the noise degree as no longer all wall exhaust fans followers are created equal. Expect to pay more for quieter exhaust fans.

Energy effectivity – Take be aware of the power effectivity of the exhaust fan. When given a desire between two exhaust followers with relatedm3/h, choose the one with decrease wattage.

Air ducts – Air ducts may additionally be vital if the roof space is slim and limited. Please seek advice from your builder or electrician for extra information.

If you want to learn more about us, please contact us, we will give the best service for you.

HOW TO INSTALL AND MATAIN WALL MOUNT BATHROOM FAN IN YOUR BATHROOM

When the house is decorated, there will be design and installation of mount exhaust fans, most of them will be installed in the bathroom, and the installation of wall mount bathroom fan is also needed to pay attention to, so we had better firstly look at some methods of installing it, so that the decoration will be more convenient. So what are the installation methods of wall mount bathroom fan? What are the main points to maintain it? Jiangmen Jinling ventilating fan Manufacture Ltd. was founded in 2000, with so many years’ experience in wall mount bathroom fan, today we would like to share some insights with you about how to install and maintain it in your bathroom.

Where there is no sun, the moisture is very heavy, and the wet space is not only easy to breed bacteria, but also makes the bathroom with odor. However, when decorating, do the following point which can make the bathroom dry and clean. For families without windows in the bathroom, in addition to drying the bathroom water in time after each wash to put an end to moisture, the function of the wall mount bathroom fan can also be given full play to discharge part of the moisture. Nowadays, consumers have higher and higher requirements for home decoration, and bathroom is an important place that cannot be ignored. Many people will need to install a bathroom exhaust fan, but do not know what kind of exhaust fan to choose, or do not know how to install. For your information, the wall mount bathroom fan can be embedded above the wall because of its narrow cross-section, which leads to weak ventilation, so it is only suitable for installation in the smaller bathroom. In other words, in a relatively space, the wall mount bathroom fan will be a much more economic and efficient choice.

Concerning how to maintain the the wall mount bathroom fan, the first step of cleaning it is to pull out the fan in advance to ensure the mechanical separation of the fan and no risk of electric shock during the cleaning process. Next, a detergent is required to be added to the hot water. It is not recommended to use a highly corrosive cleaning solvent, which makes it easy to damage the plastic parts of the fan and the external coating. The filter and the rear cover are then removed from the fan and are carefully cleaned two to three times with the previously prepared hot water, in particular the oil concentration filter. In addition, the small motor in the ventilation fan shall not be immersed in water to avoid affecting the future use of the motor. As an electrical device to be used on a daily basis, it is still not suitable for frequent switching. Too frequent opening or closing is likely to cause a button failure. However, the wall mount bathroom fan must be cleaned regularly to avoid the accumulation of excessive dust and bacteria on the fan. 

WHAT MAKES BATHROOM WINDOW FAN STAND OUT

If the choice of the window mounted bathroom exhaust fan is wrong, the installation will not only have a variety of problems, but also it will lead to a lot of unexpected problems. Bathroom is very important place in the house, and we must pay close attention to drainage, exhaust and other problems, so that the bathroom can be used for a long time. If you don’t do this well, it will shorten the service life of the bathroom.

As you may know, according to the current market, the price of the commonly used bathroom window fan is about 30-150 yuan. Of course, the price will be more expensive if the product of big brand is selected. There are three kinds of bathroom exhaust fan used most in the present time, namely wall-mounted, ceiling type and window type. Their prices and installation methods are certainly different. We need to choose according to their actual situation, and the specific price can be found in the local building material market. There are many styles of bathroom exhaust fans, so the size is also different. The outer frame size of a more common window mounted bathroom exhaust fan is 34*14*34 cm, and its opening size is 29*29 cm. Now let’s compare different styles of bathroom exhaust fan to see what makes bathroom window fan stand out.

Firstly, ceiling exhaust fan is the most common kind of style, and its appearance is very good. It can be installed on the ceiling of the bathroom with beautiful atmosphere. It is a kind of style that many families like to choose. However, the pipeline of ceiling exhaust fan is relatively short, and it is necessary to purchase a ventilation pipe matched with the pipeline for better exhaust when installed. The wall-mounted exhaust fan is small and can be inlaid in the window. However, because of its small volume and narrow cross-section of air outlet, its exhaust effect is relatively poor, which is only suitable for small toilets. The wall-mounted exhaust fan can also be installed on the wall of the bathroom, because most of the water vapor will accumulate on the wall, which can exhaust better. There is a difference between the window mounted bathroom exhaust fan and the two exhaust fans mentioned above. It has a single and double operation mode, which can not only drain the indoor air, but also convert the outdoor fresh air to the indoor. Therefore, the bathroom window fan is not only suitable for bathroom, bedroom, kitchen, and other rooms can also install this kind of fan.

Secondly, the individual relatively small exhaust fan is a wall-mounted type fan, which can be tightly inlaid on the upper part of the wall, but the wall-mounted exhaust fan is only suitable for being installed in the small toilet because the area of the air exhaust port of the wall-mounted exhaust fan is relatively small, so that the air exhaust and ventilation are relatively weak. The more beautiful exhaust fan is the ceiling fan, which can be installed on the roof of the toilet, but because its pipeline is relatively short, it is necessary to buy a ventilation pipe and it is used with it. The bathroom window fan can absorb out the bad air in the toilet and to absorb the fresh air in from the outside, and it is also suitable for working in a large bathroom, so it is better than the above two types in the whole effect.